Geniue Zebra ZT610 6inch industrial barcode label printer

• Height: 15.58″(395.68 mm)
• Width: 10.56″(268.2 mm)
• Depth: 19.88″(505.0 mm)
• Weight: 50 lbs.(22.7 kg)

 Media Specifications

• Media type: continuous, die-cut, notch, hole, orblack mark
• Media width (label and liner): 0.79″ (20 mm)to 4.5″ (114 mm)
• Minimum label length.

ZT610 – 203/300 DPI

Rewind mode: 0.25″(6 mm
Peel mode: 0.5″ (13 mm)
Tear-off mode: 0.7″ (18 mm
Cutter mode: 1.5″ (38 mm)

ZT610 – 600 DPI
Rewind mode: 0.125″(3 mm)0
Peel mode: 0.5″ (13 mm)Tear-off mode: 0125″ (3 mmCutter mode: 15″ (38 mm)
Media thickness (label and liner):0.003″ (0.076 mm) to 0.012″ (0.305 mmnon-cutter
Maximum media roll size:8.0″(203 mm) outside diameter on a 3(76 mm) inside diameter core
Transmissive (gap) sensing standards:-Interlabel gap: 2-4 mm, preferably 3 mmSensing notch: 0.25″ W (6 mm) x 0.12″ L3 mm)Sensing hole: 0125″ (3 mm) diameter

Reflective (black mark) sensing standards:-Black mark length (parallel to insideedia edgel:0.12″-0.43”(3-11 mm)Black mark width (perpendicular to insidemedia edge): 0.43″ (> 11 mm)Black mark location: within 0.040″(1 mmof inside media edgeBlack mark density: >1.0 Optical Density Units (ODU)
Maximum media density: 0.5 ODU

Ribbon Specifications

• Standard lengths: 1476′ (450 m)
• Provides 3:1 media roll to ribbon ratios
• Maximum ribbon roll size:
• 3.2″(81.3 mm) outside diameteron a 1.0″ (25.4 mm) inside diameter core
• Ribbon wound coated-side out
• Ribbon width: 0.79″ (20 mm) to 4.33″ (110 mm)

Electrical Specifications

• 250 watt rated Universal power supply withpower-factor correction 90-265 VAC,47-63 Hz
• Agency approvals: IEC 60950-1，EN 55022Class B,EN 55024,EN 61000-3-2,EN 61000-3-3
• Product Markings: cTUVus, CE, FCC-B,ICES003,VCCl, C-Tick, NOM, S-Mark(Arg), CCC,GOST-R,BSMl,KCC,STB, and UkrSEPRO

Printing Specifications

• 203 dpi resolution (8 dots/mm)
• Heater dimension (W x L): 0.0043″ x 0.0052(0.110 mm x 0.132 mm)
• First dot location measured from inside mediaedge:0.14″ +0.05″ (3.5 mm +1.25 mm)
• Maximum print width: 832 dots 4.09″ (104 mm)Maximum non-continuous media print length39″(991 mm)
• Maximum continuous media print length 1503810 mm)
• Media registration tolerance:Vertical:
  o+0.30 mm at print speeds at or below4 ips
  o + 0.50 mm at print speeds 5 – 6 ipso +1.5mm at speeds greater than 6ips-Horizontal: 士 0.060″+ 1.5 mm)
• Programmable print speedsinches per second):2, 4, 3,4,5,6,7,8,9,10,11,12,13, 14
• Barcode modulus“x” dimension:Picket fence (non-rotated) orientation:4.9 mil to 49 milLadder (rotated) orientation:4.9 mil to 49 mil